Showing posts with label Presentation. Show all posts
Showing posts with label Presentation. Show all posts

Thursday, May 29, 2014

Blog 22: Senior Project Reflection

(1) Positive Statement


What are you most proud of in your Block Presentation and/or your senior project? Why?


I'm proud of my power point because I created 64 slides for my presentation and I believe this helped me to exceed the required time limit for this block presentation. I'm also proud of creating my activity. I thought my activity tied really well with my first and second answers to my EQ. 

(2) Questions to Consider


a.     What assessment would you give yourself on your Block Presentation (self-assessment)?

AE

b.     What assessment would you give yourself on your overall senior project (self-assessment)?

AE/P+

(3) What worked for you in your senior project?

 
My mentorship overall worked really well throughout my senior project because of what I did at mentorship. The AutoCAD work really helped me with a lot of my presentations because it showed not only my work at mentorship, but it also really connected with my EQ. AutoCAD was also important because it was good reference for my foundation and my answer (when I explain the SMRF).

(4) (What didn't work) If you had a time machine, what would have you done differently to improve your senior project if you could go back in time?

I felt like it would have been more beneficial for me to find a class that either taught AutoCAD or the basics of structural engineering. Instead of doing more mentorship, if I could go back in time, I would've taken a class instead of doing more mentorship hours for my independent components. Doing extra mentorship hours consumed a lot of my time and I had a little bit of some time management issues with my classes because of this.

(5) Finding Value

How has the senior project been helpful to you in your future endeavors?   Be specific and use examples.

I'm going to be majoring in electrical engineering, and my mentorship throughout the year helped me get ahead in my major. Most engineers use AutoCAD software and I believe by being just a little familiar with this software will help me progress more in my electrical engineering career. Senior project has also shown me an engineer's daily job. During my mentorship, I met a few younger engineers (there about in their late 20's or early 30's) and most of their job is too just go on AutoCAD software and design and check structures. So this gave me an insight of what my future may hold during my beginnings when I actually become an electrical engineer.

Wednesday, February 26, 2014

Blog 16: Advisory Meeting #2

EQ: How can a structural engineer best design a building for earthquake resistance?

Answer #2 (Write in a complete sentence like a thesis statement)*

Through using different types of seismic analyses on buildings can contribute in designing a building for earthquake resistance.

3 details to support the answer (a detail is a fact and an example)

Equivalent Static Analysis: An analysis that estimates base shear loads for each story of a low to medium rise building. Ex: Earthquakes put extra force into the building and buildings already have their own forces/ loads. Equivalent Static Analysis helps reduce some of the buildings own loads.
Time History Analysis: Visualizes or predicts performance level of a building under a given earthquake by measuring the history of specific areas that are more prone to earthquakes. Ex: Japan has a long history of earthquakes from low to high magnitudes. In engineering software, engineers can simulate the same magnitude of a Japanese earthquake in the 20th century and test their buildings.
Ground Motion Maps: Under building code ASCE7, these maps are used to measure seismic ground motion values. These values represent the spectral response accelerations in different periods of earthquakes. Ex: These maps are color coded and have a legend showing the distance between buildings and the color coded areas show the impact of the earthquakes.

The research source (s) to support your details and answer

 Source ID #: 11, Bagheri, Bahador "Comparatice damage assessment of Irregular Building Based on Static and Dynamic Analysis." International Journal of Civil and Structural Engineering. 3.3 (2013): 505-511. Print. (for Equivalent Static Analysis)
Source ID #: 33, Jumaat, Zamin. "Earthquake time history for Dhaka, Bangladesh as competent seismic record." International Journal of the Physical Sciences, 2011. Web. 26 Feb. 2014. (for Equivalent Static Analysis and Time History Analysis)
Source ID #: 30, Dowty, Susan. "Seismic Design Provisions of ASCE 7-10: Changes from ASCE 7-05." Structural Engineer, July 2011. Web. 20 Feb. 2014. (for Ground Motion Maps).

Concluding Sentence

Seismic analyses are important in designing buildings for earthquake resistance because they can measure the area and performance levels of buildings.

Thursday, February 6, 2014

Blog 13: Lesson 2 Reflection

1. Positive Statement


What are you most proud of in your Lesson 2 Presentation and why?

I'm most proud of my powerpoint because on my lesson 1, the look of my powerpoint was very bland, so I try to put more colors and themes this time.

2. Questions to Consider
       a.     What assessment would you give yourself on your Lesson 2 Presentation (self-assessment)?

       AE       P          AP       CR       NC

I would give myself a P

       b.     Explain why you deserve that grade using evidence from the Lesson 2 component contract.

I did what was required, which was turning in a poster with my EQ, coming in on time, presenting in the right length of time, turning in my final lesson plan, having an activity (LEGO tower activity), presenting an answer to my EQ (By creating a better foundation, using Special Moment Restraint Frames (SMRF) with isolators.), addressing the EQ (How can a structural engineer best a building for earthquake resistance), having materials, citing my research (my sources, mentor MCEER website) and cleaning up.

3. What worked for you in your Lesson 2?

Everyone participated in my activity and I also got good feedback about my activity.

4.  (What didn't work) If you had a time machine, what would you have done differently to improve your Lesson 2?

I would try not to face the audience with my back as much, so I would try to point to my pictures using a stick or something. I would also try to change my hook activity since the audience was giving me the same answers to my questions. 

5. Finding Value
What do you think your answer #2 is going to be?  

My answer #2: Designing structures with more ductility features.